View NL8060BC26-13_132664.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
w
w
a D . w DESCRIPTION
NL8060BC26-13 is a TFT (thin film transistor) active matrix color liquid crystal display (LCD) module comprising amorphous silicon TFT attached to each signal electrode, a driving circuit, and a backlight. The 26 cm diagonal display area contains 800 x 600 pixels and can display 262144 color simultaneously. By utilizing one lamp/edge-light type backlight, a very thin profile and low power consumption have been achieved.
aS t
ee cm (10.4 type), 800 x 600 pixels, 262144 colors, h 26
incorporated one lamp/edge-light type backlight
4U t
om .c
TFT COLOR LCD MODULE
NL8060BC26-13
FEATURES
* Thin and light weight * Low power consumption * Low reflection * 6-bit digital RGB signals * 3.3 V operation (5.0 V available) * Data enable function
* Incorporated edge light type backlight (One lamp, Inverter-less) * Three mounting holes (right-top, right-bottom and left-bottom)
APPLICATIONS
* Personal computer (PC), word processor * Display terminals for control system * Monitors for process controller
w
w
.D w
t a
S a
e h
t e
U 4
.c
m o
Document No. EN0295EJ1V0DS00 Date Published March 1997 P Printed in Japan
w
w
w
.D
a
aS t
ee h
4U t
om .c
(c)
1997
NL8060BC26-13
STRUCTURE AND FUNCTIONS
A color TFT (thin film transistor) LCD module is comprised of a TFT liquid crystal panel structure, LSIs for driving the TFT array, and a backlight assembly. The TFT panel structure is created by sandwiching liquid crystal material in the narrow gap between a TFT array glass substrate and a color filter glass substrate. After the driver LSIs are connected to the panel, the backlight assembly is attached to the backside of the panel. RGB (red, green, blue) data signals from a source system is modulated into a form suitable for active matrix addressing by the onboard signal processor and sent to the driver LSIs which in turn addresses the individual TFT cells. Acting as an electro-optical switch, each TFT cell regulates light transmission from the backlight assembly when activated by the data source. By regulating the amount of light passing through the array of red, green, and blue dots, color images are created with clarity.
BLOCK DIAGRAM
H-driver
600 lines
V-driver
R0-R5 G0-G5 B0-B5
Digital signal processor
Level shift
2400 lines TFT LCD panel H : 800 x 3 (R, G, B) V : 600
CLK Hsnyc Vsnyc DE
LCD timing controller
VCC
Power supply circuit
LSls Drivers
Backlight
VHV
OUTLINE OF CHARACTERISTICS (at room temperature)
Display area Drive system Display colors Number of pixels Pixel arrangement Pixel pitch Module size Weight Contrast ratio Viewing angle (more than the 211.2 (H) x 158.4 (V) mm a-Si TFT active matrix 262144 colors 800 x 600 pixels RGB vertical stripe 0.264 (H) x 0.264 (V) mm 242.0 (H) x 173.9 (V) x 7.0 typ. (D) mm 347 g (typ.) 150:1 (typ.) contrast ratio of 10:1) Horizontal : 50 (typ. left side, right side) Vertical : 20 (typ. up side), 40 (typ. down side) * Wider viewing angle with contrast ratio : down side (6 o'clock) * Wider viewing angle without image reversal: up side (12 o'clock) * Optimum grayscale ( = 2.2) : perpendicular 42 % (typ. center, to NTSC) 40 ms (max.), "white" to "black" 110 cd/m2 (typ.) (Lamp current: 3.0 mArms) 6-bit digital signals for each of RGB primary colors, synchronous signals (Hsync, Vsync), dot clock (CLK) 3.3 V [5.0 V] (Logic, LCD driving) Edge light type, one cold cathode fluorescent lamp, inverter-less 2.8 W (typ. at 3.3 V, 110 cd/m2)
Designed viewing direction
Color gamut Response time Luminance Signal system Supply voltage Backlight Power consumption
2
NL8060BC26-13
GENERAL SPECIFICATIONS
Item Module size Display area Number of pixels Dot pitch Pixel pitch Pixel arrangement Display colors Weight Specification 242.0 0.5 (H) x 173.9 0.5 (V) x 7.5 max.* (D) 211.2 (H) x 158.4 (V) 800 (H) x 600 (V) 0.088 (H) x 0.264 (V) 0.264 (H) x 0.264 (V) RGB (Red, Green, Blue) vertical stripe 262144 353 (max.) color g Unit mm mm pixel mm mm
Note No inverter for the backlight is integrated in the module.
* D = 7.0 typ.
ABSOLUTE MAXIMUM RATINGS
Parameter Supply voltage Input voltage Storage temp. Operating temp. Humidity Symbol VCC VI TST TOP RH Rating -0.3 to 6.5 -0.3 to 6.5 -20 to 60 0 to 50 < 95 % relative humidity = < 85 % relative humidity = Absolute humidity shall not exceed Ta = 50 C, 85 % relative humidity level Unit V V C C - - - Module surface* < Ta = 40 C < 40 < Ta = 50 C Ta > 50 C No condensation VI - VCC < 3.0 Remarks Ta = 25 C
* Measured at the display area
ELECTRICAL CHARACTERISTICS
(1) Logic, LCD driving
Ta = 25 C Parameter Supply voltage Symbol VCC Min. 3.0 (4.75) 0 VCC x 0.7 - - *1 Typ. 3.3 (5.0) - - 280 *1 (240) Max. 3.6 (5.25) VCC x 0.3 5.25 470 *2 (450) *2 Unit V VCC = 3.3 V (VCC = 5.0 V) CMOS Level CMOS Level VCC = 3.3 V (VCC = 5.0 V) Remarks
Logic input "L" voltage Logic input "H" voltage Supply current
VIL VIH ICC
V V mA
*1. Checker flag pattern (in EIAJ ED-2522) *2. Theoretical maximum current pattern
3
NL8060BC26-13
(2) Backlight
Ta = 25 C Parameter Lamp current Symbol IL Min. 2.0 Typ. 3.0 Max. 4.0 Unit mArms Remarks 80 cd/m2 (TYP.): 2.0 mArms 110 cd/m2 (TYP.): 3.0 mArms 120 cd/m2 (TYP.): 4.0 mArms IL = 3.0 mArms Ta = 0 C Ta = 25 C Note
Lamp voltage Lamp turn on voltage
VL VS
- 1440 960
610 - - -
- 1600 1600 95
Vrms Vrms Vrms kHz
Oscillator frequency
Ft
50
Note
Recommended value of "Ft" * Ft is within the specification. and * Ft = 1 4th x (2n-1) th : Hsync period n : a natural number (1, 2, 3, ****)
If Ft is out of the recommended value, interference between Ft frequency and Hsync frequency may cause beat on the display.
SUPPLY VOLTAGE SEQUENCE
3.0 (4.75 V) VCC 0s*1
Apply VHV within the LCD operation period. When the backlight turns on before LCD operation or the LCD operation turns off before the backlight turns off, the display may momentarily become white.
*2
Signals 2tv 0<
When the power is off, please keep whole signals (Hsync, Vsync, CLK, DE, data) low level or high impedance.
Backlight
4
NL8060BC26-13
INTERFACE PIN CONNECTION
(1) Interface signals, power supply Module side connector CN1 ... DF9B-41P-1V (No. 1 to 41) Supplier: HIROSE ELECTRIC CO,. LTD. Mating connector DF9X-41S-1V (X *** A, B, C) or IL-310-T41S-VF Supplier: Japan Aviation Electronics Industry limited (JAE) note: Mating connectors are possible to use both parts.
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Symbol GND CLK GND Hsync Vsync GND GND GND R0 R1 R2 GND R3 R4 R5 GND GND GND G0 G1 G2 Ground Dot clock Ground Horizontal sync. Vertical sync. Ground Ground Ground Red data (LSB) Red data Red data Ground Red data Red data Red data (MSB) Ground Ground Ground Green data (LSB) Green data Green data
Note 3 Note 3 Note 3 Note 3 Note 3 Note 3 Note 3 Note 3
Function
Note 3
Pin No. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
Symbol GND G3 G4 G5 GND GND GND B0 B1 B2 GND B3 B4 B5 GND DE VCC VCC VCC MODE Ground
Function
Note 3
Green data Green data Green data (MSB) Ground Ground Ground Blue data (LSB) Blue data Blue data Ground Blue data Blue data Blue data (MSB) Ground Data enable Power supply Power supply Power supply Timing mode select
Note 1 Note 1 Note 1 Note 2 Note 3 Note 3 Note 3 Note 3 Note 3
LSB : Least Significant Bit MSB : Most Significant Bit
Notes 1. VCC: All VCC terminals should be connected to 3.3 V [5.0 V]. 2. MODE: H = Fixed mode L or open = DE mode
3. GND is not connected to the frame of the LCD module. (2) Backlight lamp side connector CN2 *** HV-2S-C1 Supplier: mating connector HV-2P-HF
Japan Aviation Electronics Industry Limited (JAE)
Pin No. 1 2
Symbol VHV VHL
Function High voltage terminal Low voltage terminal
5
NL8060BC26-13
(1) Connector location

CN2 CN1
1 * * * * * 41
2 * * * * * 40
1
2
MOUNTING HOLE LOCATION

CN2
: mounting hole
6
NL8060BC26-13
DISPLAY COLORS vs. INPUT DATA SIGNALS
Display colors Data signal (0: Low level, 1: High level) R5 R4 R3 R2 R1 R0 Black Blue Red Magenta Green Cyan Yellow White Black Dark Bright Red Black Dark Bright Green Black Dark Bright Blue 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 | | | 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 | | | 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | | | 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 | | | 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | | | 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | | | 1 1 1 0 1 1 1 0 1 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 1 0 0 1 1 0 0 1 1 0 1 0 G5 G4 G3 G2 G1 G0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 | | | 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | | | 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 B5 0 1 0 1 0 1 0 1 0 0 0 B4 0 1 0 1 0 1 0 1 0 0 0 B3 0 1 0 1 0 1 0 1 0 0 0 | | | 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B2 0 1 0 1 0 1 0 1 0 0 0 B1 0 1 0 1 0 1 0 1 0 0 0 B0 0 1 0 1 0 1 0 1 0 0 0
Basic colors
Red grayscale
Green grayscale
Blue grayscale
Note
Colors are developed in combination with 6-bit signals (64 steps in grayscale) of each primary red, green, and blue color. This process can result in up to 262144 (64 x 64 x 64) colors.
7
NL8060BC26-13
INPUT SIGNAL TIMING
(1) Input signal specifications
Parameter CLK Frequency Duty Rise, fall Hsync Period Symbol 1/tC tch/tC tcrf th Min. 34.0 0.4 - 24.3 - Display period Front-porch thd thf 4 Pulse width thp* 2 2 Back-porch thb* 73 13 thp + thb* 15 CLK-Hsync timing Hsync-CLK timing Hsync-Vsync timing Vsync-Hsync timing Rise, fall Vsync Period thch thcs tvhh tvhs thrf tv 10 8 1 15 - 16.1 - Display period Front-porch tvd tvf 1 Pulse width tvp* 1 1 Back-porch tvb* 1 1 tvp + tvb* 2 Rise, fall DATA R0 - R5 G0 - G5 B0 - B5 DE CLK-DATA timing DATA-CLK timing Rise, fall DE-CLK timing CLK-DE timing Rise, fall tvrf tds tdh tdrf tes teh terf - 8 10 - 8 10 - Typ. 38.362 0.5 - 26.693 1024 800 24 24 72 72 128 128 200 200 - - - - - 16.683 625 600 1 1 2 2 22 22 24 24 - - - - - - - 24 10 - - 10 - - 10 - 23 - 23 - 511 - - - - 10 17.2 - - 127 127 198 509 Max. 40.0 0.6 10 - - Unit MHz - ns Remarks 26.067 ns (TYP.)
s
CLK CLK CLK CLK CLK CLK CLK CLK CLK CLK ns ns CLK ns ns ms H H H H H H H H H H ns ns ns ns ns ns ns
37.463 kHz (TYP.)
fixed timing mode DE mode fixed timing mode DE mode fixed timing mode DE mode fixed timing mode DE mode
59.94 Hz (TYP.)
fixed timing mode DE mode fixed timing mode DE mode fixed timing mode DE mode fixed timing mode DE mode
DE mode
All of parameters should be kept in the specified range.
8
NL8060BC26-13
(2) Definition of input signal timing
tv tvp
Vsync tvf
tvb
Display period
(note)
tvd
DE (at DE mode) 1 2 3 4 600

th thp
Hsync
thb
thf
Display period
(note)
thd
DE (at DE mode)
Note
These do not exist as signals.
9
NL8060BC26-13
tC tch 0.7 VCC 0.5 VCC 0.3 VCC tcrf tcrf
CLK
tds DATA (R0-R5) 0.7 VCC (G0-G5) 0.5 VCC (B0-B5) 0.3 VCC tdrf INVALID
tdh INVALID
tdrf
teh 0.7 VCC 0.5 VCC 0.3 VCC
tes
teh
tes
DE
terf
terf
CLK
0.5 VCC thch 0.7 VCC 0.5 VCC 0.3 VCC thrf thcs
Hsync
Hsync
0.5 VCC tvhh 0.7 VCC 0.5 VCC 0.3 VCC tvrf tvhs
Vsync
10
NL8060BC26-13
(3) Input signal timing chart a) Fixed timing mode
Vsync 1H (min.) 1H (min.) 24H (fixed) 1H 600H (fixed) 1H
Hsync 123 24 25 623 625 624 1
Hsync 25 26 624 625 1
R0 - R5 G0 - G5 B0 - B5 D (X, 0) INVALID D (X, Y) D (X, 598) D (X, 599) INVALID (Note: X = 0 to 799)
Hsync
R0 - R5 G0 - G5 B0 - B5 INVALID D (0, Y) D (1, Y) D (X, Y) D (798, Y) D (799, Y) INVALID
Hsync 2CLK (min.) 2CLK (min.) 200CLK (fixed) 1CLK 800CLK (fixed) 24CLK
CLK 1 2 200 201 1000 1001 1024 1
R0 - R5 G0 - G5 B0 - B5 INVALID D (0, Y) D (1, Y) D (799, Y) INVALID (Note: Y = 0 to 599)
11
NL8060BC26-13
b) DE mode
Vsync 1H tvp tvb 600H (fixed) tvf
Hsync 123 1
DE
R0 - R5 G0 - G5 B0 - B5 D (X, 0) INVALID D (X, Y) D (X, 599) INVALID (Note: X = 0 to 799)
DE
R0 - R5 G0 - G5 B0 - B5 INVALID D (0, Y) D (1, Y) D (X, Y) D (798, Y) D (799, Y) INVALID
Hsync 1CLK thp thb 800CLK (fixed) thf
CLK 1 DE 2 1
R0 - R5 G0 - G5 B0 - B5 INVALID D (0, Y) D (1, Y) D (799, Y) INVALID (Note: Y = 0 to 599)
12
NL8060BC26-13
(4) Display position
D (0, 0) D (0, 1) D (1, 0) D (1, 1) ----------------D (X, 0) D (X, 1) --------------------------------D (798, 0) D (798, 1) D (799, 0) D (799, 1)
---
---
---
---
-----------------------------------------
D (0, Y)
D (1, Y)
D (X, Y)
---
---
D (798, Y)
D (799, Y)
---
---
---
---
---
---
-------------------------
D (0, 598) D (0, 599)
D (1, 598) D (1, 599)
D (X, 598) D (X, 599)
D (798, 598) D (798, 599)
D (799, 598) D (799, 599)
OPTICAL CHARACTERISTICS
(Ta = 25 C, VCC = 3.3 V) Item Contrast ratio Symbol CR Condition Best contrast angle R = 0, L = 0, D= 5, White/black Min. - Typ. 400 Max. - Unit - Remark Note 1 Note 4
= 2.2 viewing angle R = 0, L = 0, U= 0, D= 0, White/Black, at center
Luminance Luminance uniformity Color gamut Response time Viewing angle range Lvmax - C tpd White (IL = 3.0 mArms) White At center, to NTSC White to black CR > 10, U = 0, D = 0
80
150
-
-
80 - 35 - - -
100 - 43 - 50 50 20 40
- 1.25 - 40 - - - -
cd/m2 - % ms deg. deg. deg. deg.
Note 2 Note 3 - Note 5 Note 4
R L U D
CR > 10, R = 0, L = 0
- -
Notes 1. The contrast ratio is calculated by using the following formula. Contrast ratio (CR) = Luminance with all pixels in "white" Luminance with all pixels in "black"
2. The luminance is measured after 20 minutes from the module works, with all pixels in "white". The typical value is measured after luminance saturation.
50 cm Photo-detector
1 LCD module
---
---
13
NL8060BC26-13
Notes 3. Luminance uniformity is calculated by using te following formula. Luminance uniformity = Maximum luminance Minimum luminance
The luminance is measured at near the five points shown below.
Colum
133
400
667
1 Line 3 4
2
100300500
5
4. Definitions of viewing angle are as follows.
Normal
L
-x
U
12 o'clock
R
+y
D
-y +x
5. Definitions of response time is as follows. Photo-detector output signal is measured when the luminance changes "white" to "black". Response time is the time between 10 % and 100 % of the photo-detector output amplitude.
100 % White
Luminance
10 %
tpd
14
NL8060BC26-13
GENERAL CAUTION
Next figures and sentence are very important, please understand these contents as follows.
This figure is a mark that you will get hurt and/or the module will have dameges when you make a mistake to operate.
CAUTION
This figure is a mark that you will get hurt when you make a mistake to operate
CAUTION (1) Caution when taking out the module 1) 1) 2) 3) 4) 5) 6) 7) 1) 2) 1) 2) Pick the pouch only, when taking out module from a shipping package. As the electrostatic discharges may break the LCD module, handle the LCD module with care against electrostatic discharges. Peel a protection sheet off from the LCD panel surface as slowly as possible. As the LCD panel and back-light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided. As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. Do not pull the interface connectors in or out while the LCD module is operating. Put the module display side down on a flat horizontal plane. Handle connectors and cables with care. The torque to mounting screw should never exceed 0.294 N*m (3 Kgf*cm). When the module is operating, do not lose CLK, Hsync or Vsync signals. If any one of these signals is lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged. Dew drop atmosphere should be avoided. Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. 3) This module uses cold cathode fluorescent lamp. conspicuously at low temperature. (5) Cautions for the module characteristics 1) Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long time may cause image sticking. (6) Other cautions 1) 2) 3) Do not disassemble and/or re-assemble LCD module. Do not re-adjust variable resistor or switch etc. When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages. Therefore, the life time of lamp becomes short (4) Cautions for the atmosphere (2) Cautions for handling the module
(3) Cautions for the operation
Liquid Crystal Display has the following specific characteristics. These are not defects or malfunctions. The display condition of LCD module may be affected by the ambient temperature. The LCD module uses cold cathode tubes for backlighting. Optical characteristics, like luminance or uniformity, will change during time. Uneven brightness and/or small spots may be noticed depending on different display patterns.
15
NL8060BC26-13
OUTLINE DRAWING: Front View (Unit in mm)
(58)
7 MAX
7.5 MAX
173.90.5 158.10.3 (76.3) (7) (3)
4-1.90.3
4-1.60.3 (4)
(11.4) (3.9)
(4) (4)
(4) (4)
3- 3.40.2
(0.75)
4-CPIMS x M2
MODULE CENTER
BEZEL OPENING (215.2 x 162.4)
ACTIVE AREA (211.2 x 158.4)
2420.5 233.80.3
(50)
(2.2)
SEALING TAPE
ACTIVE AREA CENTER
(115)
(90)
(6)
(7)
(16.6) (18)
(3.4) (3.4)
(3.4) (3.4) (3.8)
(4)
(6)
(7)
3010 1 2
HV-2S-C1 (JAE) 1: HOT 2: COLD
146.50.3
* THE VALUE IN PARENTHESE ARE FOR REFERENCE. * THE TORQUE TO MOUNTING SCREW SHOULD NEVER EXCEED 0.294 N*m (3 Kgf*cm)
16
*
XX 00 XX NEN
PP XX
PP
*
MML 1 13 0000
*
*
*
*
*
*
*
*
*
*
MMMX XXX DL BBBB XX MMM XX
MM XXXX
XXX
XXX
XX XXX XX
XXX
(4.5)
XXX
XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XX
XX
XXX
MMM EEE NN MMM NN
XXX XXX XXX XXX XXX
MLd
A{
XX XXX XXX XXX XXX XXX XXXXXX XXXXXX NW XXX XXX XXX M
NN BBB 00 NNN XXX XXX XXX XXX
XX
XX
OUTLINE DRAWING: Rear View (Unit in mm)
HIGH VOLTAGE
THE TFT COLOR LCD PANEL CONTAINS COLD CATHODE FLOURESCENT LAMPS. PLEASE FOLLOW LOCAL ORDINANCES OR REGULATIONS FOR ITS DISPOSAL
(40.9)
NL8060BC26-13
XX XXX XXX SSS XXX
MADE IN JAPAN
NN
XXX
XX
XXX
XXX
AnAnAnAnAnAnAnAnAn AnAnAnAnAnAnAnAnAnAnAnAn
XXX
XX
XX
XXX
XXX
XX
XXX
XXXXXXXXX
XX
XX
XXX
XXX
XXX
NL8060BC26-13
(3.6)
(4.6) (1.9)
(4)
(3)
(5)
104BLM-27
40
41
CAUTION
(6.05)
(4.5)
(7.6) 2 1 (5) (3.6)
SEALING TAPE
(3.4)
(2.8)
(11)
(5)
(6.6)
(4)
17
NL8060BC26-13
[MEMO]
18
NL8060BC26-13
[MEMO]
19
NL8060BC26-13
No part of this document may be copied in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or of others.
2

▲Up To Search▲

Price & Availability of NL8060BC26-13

	To Download NL8060BC26-13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .